Pelagic
Enderlein 42 Ketch
PRICE
$198,000 USD
LENGTH
42ft 0in
YEAR
1984
TYPE
Sail

Pelagic has had knowledgeable caring owners and it shows!  Over $200K has been spent during the last decade upgrading this great cruising boat.  See the list of recent upgrades in the full specifications.  Pelagic sports the much sought-after factory installed hard dodger.  Hallberg Rassy is renowned for their quality blue water center cockpit cruising boats.  Fiberglass does not wear out.  It’s all the bits and pieces attached to fiberglass that deteriorate with time and use.  Pretty much everything has been replaced during the last decade, making Pelagic fully ready and capable of continued world cruising. 

 

HIGHLIGHTS: 

  • Teak decks removed and replaced with non-skid 
  • Hull sides and hard doger awl-gripped and new NFM hull side ports 
  • Hydrovane self-steering 
  • Stern swim platform with swim ladder 
  • Cruise RO 36 GPH watermaker 
  • Garmin chartplotter, radar, and instruments 
  • Wallas forced air diesel heating 
  • Lofrans anchor windlass, Rocna 33KG anchor and 300’ of chain 

Her current owners spared no expense refitting this boat before a successful world cruise.  In their words: 

In 2014, my wife and I with our three young kids departed Portland, Oregon on a 26,000 mile three year cruise. We visited Mexico, Guatemala, El Salvador, Honduras, Nicaragua, Costa Rica, Panama, Belize, Cuba, Florida, Manhattan, Maine, Cape Breton Isle, Newfoundland, Ireland, Scotland, England, France, Spain, Portugal, Italy, Gibraltar, Morocco, Canary Islands, Cape Verde, Brazil, French Guiana, Suriname, Guyana, Trinidad and Tobago, St. Lucia, St. Vincent, Grenada, Aruba, Bonaire, Curacao, Venezuela, Colombia, San Blas, Galapagos, Marquesas and Tuamotus in French Polynesia, Hawaii and then back to Oregon.   Our Hallberg Rassy was comfortable and safe and provided us with numerous adventures and family memories.  Pelagic is well equipped and ready to start a circumnavigation tomorrow.   

 

Specifications
Name of vessel Pelagic
Model Enderlein 42 Ketch
Year 1984
Builder Hallberg-Rassy
Designer Olle Enderlein
Price $198,000 USD
Location Portland, OR
Length (feet) 42
Beam (feet) 12' 6"
Draft (feet) 6'9"
Displacement (pounds) 25,353
Ballast (pounds) 9920
Engine model Yanmar 4JH2-TE
Engine horsepower 63
Engine hours 4770
Fuel tank capacity (gallons) 117
Water tank capacity (gallons) 220
Holding tank capacity (gallons)
Questions? Call us! (206) 378-1110
VIEW FULL SPECIFICATIONS

Accommodations: 

Descending the four-step ladder from the center cockpit’s companionway hatch, you enter the main salon. First class workmanship using hand selected mahogany is Hallberg-Rassy’s trademark. Pelagic’s interior has been well cared for as is clear by the rich mahogany bulkheads and joinery work. In the HR tradition the teak and holly sole is covered by snap down carpeting, recently replaced in 2021. In the salon to port you have an L-shaped 7’ long settee that converts into a double berth once the backrest is raised. Across to starboard you have is a 6’8” settee, which also converts to a larger berth when the back is raised. There are shelves and cabinets outboard and above the settees for storage as well as storage under the settees. The solid mahogany table has two fold down leafs with storage in the center. 

Aft of the salon and to starboard, is the U-shaped ocean-going galley. There is a double basin stainless-steel sink close to centerline with single lever faucet and filtered drinking water tap. The large, three burner, gimbaled stove is outboard with cabinets behind concealed by sliding doors. The fridge is accessed through the countertop hatch in the back corner.  A top-loading freezer is aft of the nav station.  Aft of the salon and to port, is the full-size, forward facing, nav station. There is direct access to the AC/DC breaker panel and Garmin electronics.  

Proceeding forward from the salon, there’s a large head with standup shower. Across from the head and to starboard, is a double door-hanging locker with shelf and cabinet above. Forward of this is the forward cabin. The forward cabin has a traditional v-berth. Overhead you find ample cabinet storage space. There is also storage available below the bunk. 

Traveling back through the main salon and aft on the port side through the passageway, you have the engine compartment set beneath the center cockpit. The engine has excellent access through twin doors. Aft of the passageway is a spacious aft cabin with split double and single berths.  An infill makes this one, full beam berth. The aft head is located to starboard in the aft cabin. 

When one boards Pelagic they quickly realize this boat has carried her owners safely across oceans and she has been well cared for in return. She has undergone many improvements over the years with virtually everything on the boat replaced or upgraded. She has been outfitted with many redundant systems for safety and convenience at sea.  

 

Electronics and Navigation 

  • ICOM Marine SSB (IC-M710) with HAM frequencies 
  • ICOM VHF (IC-M504) 
  • ICOM VHF Commandmic in cockpit 
  • ICOM AIS (MA-500TR) 
  • Raymarine hydraulic autopilot drive 
  • Raymarine linear autopilot drive 
  • (2) Autohelm autopilot controllers (ST 6000 at Nav station and cockpit)  
  • Autohelm autopilot controller (ST 7000 in cockpit) 
  • Hydrovane self-steering wind vane 
  • Garmin GMI wind, speed and depth instruments at companionway and repeater at nav station 
  • Garmin chartplotter (GPSmap 740s) 
  • Garmin Radar 
  • Weems and Plath nav station clock 
  • Chelsea Ship Strike clock  
  • Harwich Barometer  
  • Cell phone booster antenna on mizzen 
  • 26” TV mounted on bulkhead 
  • Kenwood CD & USB stereo  
  • Bose speakers in salon and cockpit 

 

Electrical 

  • Paneltronics 12 volt DC breaker panel 
  • Paneltrionics 120 volt AC breaker panel 
  • Ample Power battery monitor  
  • Spare Ample Power 3 step voltage regulator 
  • Sterling Power 65 Amp World Charger, 110V/220V input with separate shore power plug for 220V 
  • 30 Amp shore power plug 
  • 50’ shore power cord (2020) 
  • 110V shore power plug with 50’ cord 
  • (2) Solar panels, 120W total 
  • Blue Sky solar charge controller 
  • 150 Amp 12V alternator 
  • Prosine 2300 Watt inverter 
  • (3) Lifeline 8D AGM batteries (house bank totaling 765 amp hours) 
  • Lifeline Group 31 AGM (Start bank) 
  • 12V USB plugs throughout 
  • (9) Hella cabin fans & one mounted in the engine room 
  • Cabin lights with LED bulbs 

 

Mechanical and Plumbing systems 

  • Yanmar 4JH2-TE 63hp engine 
  • New turbocharger installed in 2016 
  • Dual Racor fuel filter/water separator with electric priming pump 
  • Main fuel tank 50 gallons  
  • Port fuel tank 40 gallons 
  • Bow reserve fuel tank 17 gallons 
  • Wema fuel and water gauges 
  • 3-blade Maxprop (new in 2015) 
  • PSS dripless shaft seal 
  • Sidepower 12V bow thruster 
  • Lofrans Tigress 12V anchor windlass 
  • 12V anchor wash down pump 
  • Wallace diesel forced air heating 
  • Automatic electric bilge pump 
  • (2) emergency high volume bilge pumps  
  • Manual bilge pump 
  • Hot water heater 
  • Cruise R/O watermaker (110V, 36 gal/hr) 
  • 200 gallon main water tank 
  • 25 gallon reserve water tank in bow 
  • Seagull water filter at galley sink 
  • (2) Fresh water 12V pumps to head sink, shower, galley, cockpit shower 
  • Raw water pump at galley sink 
  • Manual fresh water pump at galley sink 
  • (2) Raritan manual toilets (installed 2021) 
  • Black water hoses replaced 2021 
  • 12 gallon & 30 gallon holding tanks 
  • Thruhulls replaced in 2014 
  • Propane solenoid, regulator and hose replaced 2021 
  • (2) 10gal aluminum propane tanks 
  • Force 10 three-burner stove and oven 
  • Contoure microwave in galley 
  • Grunert professional series fridge and freezer 
  • (2) fridge/freezer redundant compressors  

 

Sails and Rigging 

  • Doyle sail cradle cover with lazy jacks (2021) 
  • Doyle fully battened mainsail (2014) 
  • Doyle genoa (2014) 
  • North sails mizzen (2014)  
  • Storm trysail 
  • Storm sails with sheets (Never used) 
  • Strong slide mainsail track on mast 
  • Working jib (hanked on removable solent stay) 
  • Selden double spreader, anodized, main and mizzen masts 
  • Mast-mounted whisker pole 
  • Selden Rodkicker Vang 
  • Standing rigging replaced in 2014 
  • Chain plates removed and rebedded 2014 
  • Self steering hydrovane  
  • Harken Cruising 2 rollerfurler 

 

Deck and Hull 

Pelagic is a quintessential Hallberg Rassy through and through. Her hull is painted with the traditional HR paint job of white gel coat, a thin royal blue boot stripe, molded in rub rail with stainless cover and thick royal blue sheer stripe above. Her hull is hand laid with a vinylester based barrier coat under the gel coat to provide more protection against water penetration and print through of the fiberglass. Divinycell PVC closed cell foam is used for strength and insulation in all Hallberg Rassy’s, which doesn’t absorb water like balsa. All parts of the hull are bonded and laminated together providing even more strength. The decks are laid up similarly with Divinycell cores and strong backing plates laminated into place. 

The 42 (E) was designed by Olle Enderlein and is admired for her clean flush deck layout. In 2014, at Schooner Creek Boatworks, in Portland OR, Pelagic’s teak decks were removed and replaced with two layers of 6oz cloth and painted with tan Awlgrip. The hull sides, and hard dodger were re-painted with Awlgrip as well, at this time. All deck hardware, hatches, prisms and windlass were removed and rebedded making her weather tight for her 26,000 mile journey. In 2016 the bottom was stripped to gelcoat and repainted with new epoxy barrier coat and 3 coats of ablative bottom paint. Recently she has had her topsides cleaned, polished and waxed.  

  • Quad stainless anchor roller 
  • (6) Aluminum mooring cleats 
  • Anchor windlass (Lofrans Tigress 1200watt) 
  • Windlass control on bow 
  • Rocna 33KG anchor (73lbs re-galvanized in 2020) 
  • Ground tackle 300’ 3/8” (2020) 
  • Deck prisms 
  • (5) Lewmar deck hatches 
  • (10) Stainless-steel hull side opening portlights (New Found Metal) 
  • (3) dorade vents  
  • (2) solar deck vents 
  • Stainless – steel pushpit and pulpit 
  • Vinyl-covered stainless-steel lifelines with boarding gates 
  • Teak caprail 
  • Teak decking in cockpit 
  • Hard dodger 
  • Soft removable panel insert in overhead dodger 
  • Stern tie reel with webbing 
  • Outboard mount on transom 
  • Stainless liferaft holder 
  • Stainless dinghy davits with new blocks and line (2021) 
  • Cockpit table & drink holders 
  • Teak and stainless steel stern swim platform with stainless-steel ladder 
  • (2) Lewmar primary winches in cockpit 
  • (4) Lewmar winches, mast mounted 
  • (1) Lewmar winch, for headsail furler 
  • Traveler track and car for mainsheet  
  • Genoa tracks and cars 
  • LED masthead nav/anchor light 
  • Stern and bow lights 
  • Transom pressure water 

 

Safety and Miscellaneous 

  • 10’ Aquapro AMR aluminum bottom RIB (2020) 
  • 9.9HP Tohatsu outboard 
  • (2) outboard fuel tanks 
  • Viking 6 person liferaft (2014) (need service) 
  • EPIRB ACR Global GPS fix 
  • Lifesling (2021) 
  • Numerous engine parts, zincs, line, filters  

 

LIST OF UPDATES SINCE 2011: 

 

2011 

  • New Autopilot corepack installed 
  • New Cockpit teak seating fabricated and installed 

2012 

  • All 10 Portlights replaced with stainless steel ones made by New Found Metal 
  • Propane tanks replaced, two aluminum, 10 gallon 

2013-2014 

  • Teak deck removed and reinforced with two layers of 6 ounce cloth.  Deck painted with Awlgrip (by Schooner Creek Boatworks in Portland). 
  • Bottom paint was stripped and repainted 
  • Topsides Painted with Awgrip 
  • New stainless steel cap installed on hull side rubrail 
  • Hard Dodger painted with Awlgrip 
  • Standing rigging replaced with new 1 x 19 wire using Norseman lower terminals 
  • New Genoa furler 
  • New SSB to antenna feed wire 
  • Everything on deck removed and recaulked, hatches, windlass, deck prisms, etc. 
  • Lifelines Replaced 
  • New Mizzen Sail by North 
  • New Main and Genoa by Doyle (Sunbrella Oyster UV) 
  • Main Fuel Tank under engine replaced, stainless steel 50 gallons 
  • New Hydrovane self steering installed on stern 
  • New Traveler track and car for Main, main sheet blocks replaced 
  • New Genoa tracks and cars installed 
  • New Viking Liferaft and Cradle 
  • Thruhulls replaced 
  • Chainplates removed and rebedded 
  • Masts unstepped and rewired, new wiring boxes created and installed 
  • Racor fuel filter rebuilt and new fuel hoses installed 
  • New 9.9 Tohatsu Outboard 
  • Aft hatch replaced 
  • New solar vents in deck 
  • Installed Watermaker.  Cruise RO, 36 gallons per hour 
  • Garmin instruments installed, chart plotter, speed, wind, depth with additional repeater at Nav station below 
  • New Garmin Radar and mast mount installed 
  • New running rigging 
  • Center windshield replaced 
  • New batteries installed  
  • Installed New Sterling 12V/60 Amp Battery Charger, added additional socket for 220V charging in Europe 
  • Icom AIS and VHF radio installed, VHF cockpit remote mic added near helm, MMSI: 338135636 
  • Prop sharkshaft line cutter installed 
  • New fuel/water tank gauges and senders installed  

2015 

  • New three blade Maxprop installed (Brewer Boat Yard, Maine) 
  • New Masthead LED Nav/Anchor light 
  • New Anchor windlass control box 
  • Bottom Painted (Cozumel, Mexico) 
  • New exhaust elbow fabricated and installed (Ft. Lauderdale) 
  • New Fridge raw water cooling pumps 
  • New below deck autopilot hydraulic ram installed (Ireland) 
  • Windlass rebuilt and serviced, oil replaced 
  • Microwave installed in Galley 

2016 

  • Bottom paint stripped to Gelcoat, New epoxy barrier applied, bottom paint (Power Boats Yard, Trinidad) 
  • Prop Shaft PSS dripless seal replaced 
  • New Yanmar Turbo installed 
  • Cushions reupholstered 
  • New 2300 watt inverter  
  • Sails restiched/reinforced (Portugal) 
  • Stern and Bow Nav lights replaced 

2020 

  • New Anchor Chain installed, 300’ 3/8″ BBB 
  • Rocna 33 Anchor regalvanized 
  • EPIRB factory tested and new battery installed 
  • New Aluminum bottom RIB dingy on davits 
  • New 50’ shore power cable 

2021 

  • New Carpet installed 
  • New deck hatch in head installed 
  • New Doyle Sail Cradle Covers/Stackpacks with Lazy Jacks 
  • Topsides cleaned, polished and waxed 
  • New Lifesling on stern 
  • Flat Panel TV replaced with updated model 
  • 2 x New Raritan Toilets and new hoses installed in fore and aft heads 
  • Propane solenoid, regulator and hose replaced  
  • Blocks and line replaced on Dingy Davit 
  • Rocna primary anchor regalvanized 
  • New 300’ of Acco 3/8” HT G4 chain, swivel and shackle on primary anchor 
RELATED SEARCH

Monk Motor Yacht 50
Topaz $149,000 USD
LENGTH
YEAR
LOCATION
50
1964
Bainbridge Island, WA
Swan 441
Gusto $179,000 USD
LENGTH
YEAR
LOCATION
44
1979
Seattle, WA
Passport 42
Cat's Paw $150,000 USD
LENGTH
YEAR
LOCATION
42
1980
Bainbridge Island, WA


[contact-form-7 id=”2506″ title=”Contact”]

`